This article explains how to set up the Deco Device X58 - 4G.

Before you begin

• These steps are also compatible with both Wireless Broadband and Rural Broadband
• Deco X58 - 4G modems are plug and play compatible.
• You should install the Deco App and link your Deco Device to unlock more features.

Steps

1. Insert the Nano SIM card into the slot on the base of the modem
   
   • Make sure you are inserting the correct SIM Card
   • Place the modem on its back
   • The SIM card slot is just above the light

   Note: If there is already a SIM in the modem, press it in to release it then remove it.

2. Plug the provided power adaptor into your Deco Device.
   

   

3. Wait for the LED on your modem to turn solid green. You are now connected to the internet.
   
   • This will take approximately 3 minutes
   • Led light guide below
     

     

     

4. Your Wifi username and password are located at the bottom of your modem. Or, on a Wifi sticker in the modem box. Use these details to connect your devices to your Wifi.
   

   

   Once your Deco device is set up and running you can refer to the signal strength indicator on the app to find the best location (usually near a window

Support

If you are looking to add more Deco units (like SuperWifi), set up parental controls, or manage their Wifi connection then see the articles below.