Follow these helpful steps to access the modem management page for the older modems shown here.
The I.P. address normally used for these modem/routers is 192.168.1.1 while the Technicolour uses 192.168.0.1

Use your normal browser to enter the I.P. address and log in.

For a Deco modem or router, use the Deco App, and you can find more modem support here .

UltraHub	UltraHub Plus
Administrator Username: vodafone Password: The password is found on the bottom of your modem.	Administrator Username: vodafone Password: The password is found on the bottom of your modem.

B818 4G modem	H122 5G modem
Password: The password is on the bottom of your modem. Note: there is no username. Use address 192.168.1.1	Password: The password is on the bottom of your modem. Note: there is no username

B315 4G modem/router	HG659 DSL modem
Administrator Username: admin Password: admin	General user Username: vodafone Password: vodafone Administrator Username: Admin Password: @[last 8 digits of your modem's serial number]

Vodafone Station (VOX1.5)	Broadband Complete modem
Administrator Username: vodafone Password: vodafone	General user Username: vodafone Password: vodafone Administrator Username: advanced Password: advanced

Technicolor 7210D	B525 4G modem
Administrator Username: Leave this field blank Password: password	Administrator Username: admin Password: admin

Before you start

What you'll need:

• A computer that is connected to the modem either through WiFi or an Ethernet cable.
• The username and password for your modem (found on the bottom of most of our modems).
• To ensure your modem is plugged in and powered on.

If you're using a modem that we did not supply, or if your modem isn't mentioned here, then you'll need to refer to your modem's user guide for assistance in accessing the Admin interface.

Steps

1. Open a web browser and go to 192.168.1.1 (for the Technicolor modem, go to 192.168.0.1).  

2. Enter your Username and Password.

   Please note: For the HG659, the admin username and password varies based your firmware version.  

3. On your keyboard, press Enter.

The Admin interface now appears.Using this interface, you can use it to change a password, configure your network settings, setup port forwarding, and troubleshoot any network issues.

Support

If you cannot open the web management page, please check the following:

• The power is on.
• Either your computer's WiFi is on or it is directly connected to the modem with an Ethernet cable.
• Your browser is set to automatically get an IP address and DNS server address.

If you still can't open the page, please give us a call - we'll run through some other checks on our side.